PickMyWatt

About PickMyWatt

PickMyWatt is a free, browser-based toolkit for sizing home generators. We turn appliance lists into clear wattage recommendations using the same concepts electricians use: running watts, starting (surge) watts, and the NEC continuous-load rule.

What we calculate

Methodology

  1. Running watts are the steady draw of an appliance.
  2. Starting watts are the short surge a motor needs to start (often 2–4× running watts for compressors, pumps, and AC units).
  3. Continuous loads (run 3+ hours, NEC Article 100) are sized with extra headroom per NEC 210.20(A) — the common “80% rule.”
  4. Recommended generator size must cover the largest simultaneous surge and the continuous rating of the machine — not only the peak number on the box.

Data sources

Appliance wattages are typical US residential estimates (nameplate-style ranges), not measurements of your specific unit. We cross-check against manufacturer guidance including:

Limits & safety

Our outputs are planning estimates. Real requirements change with model, age, altitude, temperature, and wiring. Always confirm the nameplate data and consult a licensed electrician before purchasing, installing, or connecting a generator. PickMyWatt is not responsible for damages resulting from reliance on these calculations.

Editorial process

Guides are written for US homeowners, cite primary manufacturer or code sources where wattage data appears, and are updated when major figures or NEC guidance change. We do not sell generators; calculators are free and run entirely in your browser.

Start calculating

Use the Generator Wattage Calculator for a custom load list, or check what your current generator can run.